Simca 1100

From Dodge Wiki
Jump to navigation Jump to search
Simca 1100
A Talbot 1100, which was a rebadged Simca 1100
Also calledTalbot 1100
SuccessorTalbot Horizon
Body style(s)3/5-door Hatchback
5-door Station-wagon
2-door Pickup truck
2-door van
LayoutFront engine, front-wheel drive
Engine(s)Simca Type 315
Length3937 mm (155 in)
Width1587 mm (62.5 in)
Curb weight918 kg (2024 lb)
RelatedMatra Rancho, Simca 1204, Simca 1118, Simca VF
ManualsService Manual
Simca 1100 Estate Como.jpg

The Simca 1100 was an automobile built from 1967 to 1982 by Chrysler Europe's division Simca. It was replaced by the Talbot Horizon.

The 1100 was the result of "Project 928", started in 1962, finalized by engineers Philippe Grundeler and Charles Scales. The design was a result of Simca's market research in the early 1960s, which showed the increasing popularity of front wheel drive cars that provided better space utilization and comfort to small cars. In Spring 1962, Simca targeted a 1966-67 launch of a new range of front wheel drive cars with sedans, wagons, and light commercial vehicles to be included, all fitting into France's 6CV tax class - between the Simca Mille and Simca 1300. Both transverse and front/back engines were tested, and in 1963, the transverse-engine design was approved.

In 1963, Chrysler took a controlling interest in Simca, approving the project in 1964, with a production target of summer 1967. The short timetable included developing a new transmission, and using a larger version of the rear engined rear wheel drive Simca Mille (Simca 1000) engine, displacing 1118 cc (the Mille used a 1.0 liter engine, the 1500 a 1.5 liter engine).

When first shown on Sardinia and the Paris Auto Show in 1967, the 1100 was advanced in design, featuring a hatchback with folding rear seats, disc brakes, rack and pinion steering, an independent front and rear suspension using Chrysler-style torsion bars (though Chrysler itself only used them up front), and a full range of controls. Numerous permutations were available, with a manual, automatic, and semi-automatic transmission. The engine was slanted to allow for a lower hood; and the engine, gearbox, and suspension were carried on a subframe to allow the unit-body to be relatively unstressed. In American fashion, the body was welded to the frame, not bolted. The 1100 was reportedly studied closely by Volkswagen when the latter company was designing its Volkswagen Golf, after making rear-engined, rear-wheel-drive vehicles.

The 1100 was (along with the pricier Renault 16), one of the first hatchback designs, with a folding rear seat, and in three and five-door variations. A station wagon was also introduced from the beginning, along with LS, GL, GLS and "Special" equipment classes.

The car was fitted with Simca Type 315 petrol OHV engines with 944, 1118, and 1294 cc variants, depending on year and market. A "stroked" 1118 cc engine displacing 1.2 litres was introduced in 1971 to the UK market as the Simca 1204. It was also sold in the USA in limited quantities.

The 1100 had a four speed manual gearbox and room for five people. There was also a three-speed semi-automatic gearbox that required manual shifting but used an electronically activated clutch. The 1100's transmission configuration was revolutionary in that it was transverse and axial with the engine giving the "engine on one side, transmission on the other" layout copied on almost all hot hatches and front wheel drive vehicles throughout the world ever since. In France, the 1100 was very successful, achieving best-seller status, but it was less competitive in non-European export markets. In the UK, while recognised as an innovative and capable car, its poor record of body corrosion and top end engine wear counted against it. The engine could be very 'tappety'.[citation needed]

Two LCV versions with van and pick-up truck bodystyles was called Simca VF2, and were sold from 1973 to 1985, three years after the 1100 had been removed from the market. In the United Kingdom, these models assumed the Dodge nameplate after 1976. In 1974, the sporty TI appeared with the 1294 engine (82 PS), at the time when the car also saw a cosmetic redesign. Based on the 1100 chassis, the Matra engineering firm created a crossover derivation engineered named Matra Rancho.

In 1968, production was already strong with 138,242 vehicles made; it reached its peak in 1973, with nearly 300,000 Simca 1100s rolling off the assembly line. However, production fell rapidly through 1977, when over 142,000 1100s were made; the following year just half that number (72,695) were made, and numbers dwindled to below 20,000 in 1981, though production continued through to 1985.

The Simca 1100 was produced in different places; in Sweden, local production was handled by Phillipsons, on the same assembly lines that made Mercedes-Benz cars.

A total of 2.2 million cars were produced. The replacement for the 1100, the C2 project, would become the Talbot Horizon, and would be a runaway success in the United States, where it sold as the Dodge Omni and Plymouth Horizon. The 1100 would also be the basis for the Matra Rancho, an early crossover which had serious 4x4 looks but a Simca 1100 basis.

  • 944 cc - 45 PS (33 kW)
  • 1118 cc - 50/52/60 PS (37/38/44 kW)
  • 1204 cc - 59 PS (43 kW)
  • 1294 cc - 62/75 PS (46/55 kW)
  • 1442 cc - 83 PS (61 kW)

See also


External links